Spring Mountings

backpprint

 

Spring mountings are used for disturbing frequencies below 16 hertz, and give a greater isolation performance than rubber mountings and pad mountings.

A summary of Embelton's spring mountings are below. To see the full range of Spring Mountings with relevant specifications, download the Embelton Spring Mountings Catalogue.

Housed Spring Mountings
Types B, C, D, CX with integral stabilisers.

Used where some control of lateral motion of equipment is required; and for an economic solution where high unit loads are involved.

  • Static deflections : 25 to 100 mm.
  • Load range : 30 to 4,375 kg.

CE2sm

Open Spring Mountings
Types A, AD, ATH, AQH, X, XD, XT and XQ.

General purpose mountings; spring, cup located.

  • Static deflections : 25 to 150 mm.
  • Load range : 10 to 10,350 kg higher loadings on application.

XL-94sm

Vertically Restrained Spring Mountings
Types AWR, ADR, XWVR, XDVR, XDRP

Used where equipment must be restrained from moving upwards due to reduction in weight (e.g. cooling towers, boilers etc.).

  • Static deflections : 25 to 50 mm.
  • Load range : 60 to 4,600 kg, higher loadings on application.

Download Embelton Spring Mountings catalogue

ADR1sm

 



viewsdg
viewiec